中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 13 No. 4 August 2003 |
steel balls in wet grinding
（1.College of Resource and Environment Engineering,
Wuhan University of Technology, Wuhan 430070, China;
2. School of Resources Processing and Bioengineering,
Central South University, Changsha 410083, China;
3. Department of Mineral Engineering,
Wuhan Institute of Chemical Technology, Wuhan 430073, China）
Abstract:Rest potentials for the steel ball electrode and the pyrite electrode as well as the combination potentials and the galvanic currents developed in the pyrite-steel ball couple were measured. The data demonstrate that the galvanic couples are going to form between the pyrite particles and the steel balls when they contact with each other. The initial combination potential and the initial galvanic current of the pyrite-ball couple while bubbling with oxygen are greater than those in aeration of air. The combination potential and the galvanic current decrease more quickly with time while bubbling with oxygen than they do in aeration of air. In an experiment of simulating wear differences, a galvanic current, which is smaller than that developed in the pyrite-ball couple, exists between two different ball electrodes in wear degree on the surface of them. Under different grinding time conditions, the equivalent corrosion current density calculated from marked ball wear data by applying Faraday’s law correlates well with those estimated from polarization curves of pyrite and ball electrodes, and the former is always greater than the latter.
Key words: electrochemical corrosion; grinding medium; steel ball wear; wet grinding
