中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 12 No. 6 December 2002 |
Development of high plasticity Al-Si alloy and its casting process
GUO Guo-wen(郭國(guó)文), LI Yuan-yuan(李元元),CHEN Wei-ping(陳維平),
ZHANG Da-tong(張大童),LONG Yan(龍 雁)
ZHANG Da-tong(張大童),LONG Yan(龍 雁)
（College of Mechanical Engineering, South China University of Technology,
Guangzhou 510640, China）
Abstract:Aiming to meet the challenge of the shape complexity and high plasticity demanded for the upper connective plate(UCP) in motorcycle, a high plasticity Al-Si alloy named HGZL-02 was developed by optimizing the chemical composition and casting process. Premium UCP castings were obtained by using optimized casting process. Results show that fine and dense microstructure are obtained in the UCP castings. An average of 224MPa in ultimate tensile strength, 149MPa in yield strength and 13.2% in elongation are achieved for T6 heat-treated UPS castings.
Key words: high plasticity; Al-Si alloy; permanent mold casting
