中國有色金屬學報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 12 No. 5 October 2002 |
a modified mixed-film lubrication model for
metal forming processes
XIONG Yong-gang(熊勇剛)1, 2, YUN Zhong(云 忠)1
（1. School of Mechanical and Electronic Engineering,
Central South University, Changsha 410083, China;
2. Department of Mechanical Engineering, Zhuzhou Institute of Technology,
Zhuzhou 412008, China）
Abstract:An analytical model for metal rolling in the mixed lubrication regime was developed based on Wilson and Chang’s asperity flattening model and Von Mises homogenous deformation model. A more rigorous average Reynolds equation was used to calculate the hydrodynamic pressure. The variations of the yield stress with strain were considered in the model. An efficient iteration procedure was developed to solve the contact area, film thickness and hydrodynamic pressure. The model is more practical with fewer assumption and converges quickly. It is applicable to a wider range of rolling regimes. The calculation results using the model agree well with the literature as well as with measured data from a rolling mill.
Key words: mixed film; rolling; lubrication; cold rolling
