中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 12 No. 5 October 2002 |
thermal-rate treatment of ZA42 alloy
ZHAO Mei（趙 梅）2， GENG Hao-ran（耿浩然）1
（1. Key Laboratory of Liquid Structure and Heredity of Materials,
Ministry of Education, Shandong University, Ji′nan 250061, China;
2. College of Mechanical Engineering, Shandong University,
Ji′nan 250061, China）
Abstract:Sand casting process and directional solidification technique combining thermal-rate treatment(TRT) were used. The influence of process parameters on TRT was investigated according to the values of impact toughness. At the same time, the mechanism of TRT was discussed. The results showed that TRT can improve the impact toughness of this alloy, while the hardness is basically constant. The time of heat preservation should not be more than 5min. Different forms of cooling intensification additive have different effects among which the zinc ingot solidified in graphite mold is the best one that can improve impact toughness of samples by more than 80%. With increasing the cooling temperature, the value of /α/(Al) crystal lattice constant increases. The element Sb has negative effect on TRT.
Key words: Zn-Al alloy; thermal-rate treatment(TRT); parameters
