中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 11 No. 6 December 2001 |
stacking behaviors in induction
plasma deposition of tungsten
（1. Institute of Surface and Coatings Technology,
Central South University, Changsha 410083, P.R.China；
2. Department of Chemical Engineering, University of Sherbrooke,
Sherbrooke, J1K 2R1, Canada）
Abstract: Particle melting, flattening, and stacking behaviors during induction plasma deposition of refractory tungsten were studied for land-based turbine engine application. Scanning electron microscopy was used to observe the morphology of particles and splats as well as to examine the microstructure of tungsten deposit. Three kinds of pores were found in the deposit, i.e., large pores with d ＞10μm, medium pores in the range of 1～10μm, and small pores withd ＜1μm. Both optimized plasma spray condition and use of spherical powder with a narrow particle size distribution are important in the elimination of large and medium pores and have significant influences on the formation of dense tungsten deposit. Highly dense tungsten deposit was obtained through complete melting, sufficiently flattening, and regularly stacking of tungsten particles.
Key words: induction plasma; tungsten; deposition
