中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 11 No. 5 October 2001 |
flow patterns in mold filling
（1. School of Materials Science and Engineering,
Harbin Institute of Technology,Harbin 150001, P.R. China;
2. Institute of Manufacturing Engineering,
Technical University of Denmark,DK-2800, Denmark）
Abstract: The potential of a 3D FDM (Finite Difference Method) computer code was presented, in prediction of flow patterns by modeling the mold filling phenomena through different gating systems. In this code, improvements and modifications were made on the original SOLA-VOF and Donor-Acceptor algorithms. A more accurate solution procedure for handling free surfaces is developed in order to describe the flows through complicated gating designs. A block casting of 200?mm×200?mm×50?mm with two different gating designs was chosen as the verifying problem. Water analog studies are carried out on these two gating designs. The comparison indicates that computer simulation could be a powerful tool in shaping gating systems.
Key words: mold filling; free surface; gating design
