中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 11 No. 3 June 2001 |
of tungsten inert gas welding joint
of super-eutectic ZA alloy
ZHAO Dong-jian(趙東建)1， ZHU Xing-hai(朱興海)2
（1. School of Materials Science and Engineering,
Shandong University, Ji′nan 250061, P.R.China;
2. Jinan Research and Inspect Institute of Boiler and
Pressure Container, Ji′nan P.R.China）
Abstract: The microstructure of butt-welding joint of supper-eutectic ZA alloy in TIG welding was analyzed through optical microscope and transmission electronic microscope. The results show that the weld seam microstructure is fine and mainly composed of columnar crystals and minor equiaxed crystals, the microstructure in the zone near the weld seam is coarse columnar crystals, and the grain in heataffected zone does not grow markedly. The joint microstructure at room temperature is consisted of β phase (rich Al), η-Zn,ε phase (CuZn compound), Al4Cu9 and other compounds. The hardness of the weld bond area and the tensile strength of the joint are a little higher than that of base materials. The specific elongation of the weld and bond area is a little lower than those of base materials.
Key words: ZA alloy; welding joint; microstructure; properties
