中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 11 No. 3 June 2001 |
on varistor properties of ZnO-Bi2O3-TiO2-Sb2O3 ceramics
（1. State Key Laboratory of Advanced Technology
for Materials Synthesis and Processing;
2. Institute of Materials Science and Engineering,
Wuhan University of Technology, Wuhan 430070, P.R.China）
Abstract: Varistor ceramics of ZnO-Bi2O3-TiO2-Sb2O3 system have been fabricated by introducing pre-fabricated ZnO seed grains with different size distributions respectively. The results show that the varistor properties were significantly influenced by the size of introduced seed grains, and introducing larger seed grains is more advantageous to the modification of microstructure and the improvement of varistor properties. The varistor properties were considerably improved with a moderately increased sintering temperature or time, whereas degraded apparently when the sintering temperature or time was excessively increased. Compared with the sintering time, the sintering temperature plays a more critical role in determining the varistor properties. By introducing pre-fabricated ZnO seed grains into the original powders, low-voltage ZnO varistor ceramics possessing the desired electrical properties have been produced with a sintering temperature of about 1 210℃ and a sintering temperature of 2～2.5 h.
Key words: ZnO-Bi2O3-TiO2-Sb2O3 ceramics; seed grains; sintering temperature; sintering time; low varistor voltage
