中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 16 No. 4 August 2006 |
GUO Jing-jie(郭景杰)2, I. OHNAKA3, H. YASUDA3
（1. School of Materials Science and Engineering, State Key Laboratory of
Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology,
Dalian 116024, China;
2. School of Materials Science and Engineering, Harbin Institute of Technology,
Harbin 150001, China;
3. Graduate School of Engineering, Osaka University, Osaka 565-0871, Japan）
Abstract: The developed model was validated by the checking of grain preferential growth orientation and the solidification experiment with low melting point alloy of Sn-21%Bi(mole fraction). It was also applied to predict the structure defects (e.g. stray grain) of unidirectionally solidified turbine blade. The results show that the developed model is reliable and has the following abilities: 1) reduce the misorientation caused by the orthogonal mesh used in simulation; 2) well reproduce the growth competition among the different-preferential-direction grains with less than 10% relative error; 3) predict the structure defect of stray grain with the accuracy over 80%; 4) optimize the grain selector to better obtain a single crystal avoiding the multigrain defect; 5) simulate the structure evolution (nucleation and growth) of the directional and single crystal turbine blade.
Key words: unidirectional solidification; misorientation; stray grain; single crystal; turbine blade
