中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 15 No. 2 April 2005 |
E.Fleury3, D.H.Kim4, CHEN Da-rong(陳大融)1, WEI Yue-gu
（1. State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, China;
2. State Key Laboratory of NonLinearity Mechanics, Insititute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China;
3. Korea Institute of Science and Technology, Seoul 130-650, Korea;
4. Center for Noncrystalline Materials, Yonsei University, Seoul 120-749, Korea）
Abstract: Al-Cu-Fe+Sn quasicrystalline(QC) composite coatings with different volume fractions of Sn, i.e. 12%, 20% and 30%, were prepared by laser cladding technique. The effects of soft phase Sn and processing parameters on the microstructure, microhardness and frictional behavior of the coatings were investigated. The results show that after laser cladding, i-phase existing in the powder is decomposed and element Sn reacts with Cu, forming β-CuSn. The volume fraction of Sn addition has less obvious effect on the microstructure, microhardness and friction performance than that of plasma sprayed coatings. The best performance in terms of microhardness and friction are obtained for the coating containing 20% Sn additions prepared with the laser power of 950W and scanning velocity of 3mm/s.
Key words: AlCuFe+Sn composite; laser cladding; coating; tribology
