中國有色金屬學(xué)報(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 14 No. 4 August 2004 |
formula selection for powder injection molding①
HUANG Bai-yun(黃伯云)2, LI Shao-qiang(李少強(qiáng))1
（1. School of Materials Science and Engineering,
Central South University, Changsha 410083, China;
2. State Key Laboratory of Powder Metallurgy,
Central South University, Changsha 410083, China）
Abstract:The polymer binder selection is one of the very important aspects for the powder injection molding. However, even nowadays the binder selection is still mainly performed by try and error method. Six commercial or intensive studied binder formulas were analyzed according to state diagram and chemical characteristics of ingredients in each binder formula. In addition, the interactions between the binder components and additives were also taken into account. Based on the analysis, the optimum binder formula was selected and some selection criterions were put forward for the binder and additives.
Key words: binder; chemistry; powder injection molding
