中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 35 No. 2 February 2025 |
（1. State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, China;
2. China Nuclear Power Design Co., Ltd., Shenzhen 518172, China）
Abstract:The influence of Ti and Zr, Nb alloying on the microstructures and performance of laser-welded molybdenum socket joints was investigated. Following Nb alloying, the average microhardness of the fusion zone (FZ) increased from HV 194.7 to HV 283.3. Additionally, Nb can react with O to form dispersed Nb2O5 along grain boundaries, impeding grain boundary migration and dislocation movement while reducing the content of volatile Mo oxide along these boundaries. The incorporation of Nb in FZ partially inhibits pore defects and enhances joint load- bearing capacity. In comparison to the laser-welded joints without adding Nb (LW), the tensile strength of the laser- welded joints with Nb alloying (LW-Nb) was significantly improved by approximately 69% from 327.5 to 551.7 MPa. Furthermore, the fracture mechanism of the joints transitioned from intergranular fracture to transgranular fracture.
Key words: laser welding; molybdenum; heat pipe; niobium alloying; microstructure; performance
