中國有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 34 No. 7 July 2024 |
（1. CAS Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China;
2. School of Science Materials and Technology, Taiyuan University of Science and Technology, Taiyuan 030024, China;
3. Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China）
Abstract:Refractory Mo0.5NbTiVCr0.25 high-entropy alloy coatings were fabricated on TC4 substrates using laser cladding technology. The coatings were aged at 600, 800 and 1000 °C for 24 h and then water-cooled. The phase composition, microstructure, and mechanical properties of the high-entropy alloy coatings were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), electron backscattered diffraction (EBSD), transmission electron microscopy (TEM), Vickers hardness testing and universal friction wear testing. The results showed that high-entropy alloy coatings retained a body-centered cubic structure after different aging heat treatments. After the aging heat treatment at 800 °C, the coatings exhibited Ti-rich precipitation phases, which were verified as Ti(O,N) face-centered cubic structures by TEM technique. The optimum aging temperature was 600 °C and the hardness of the coating was HV0.2 410. The wear mechanisms of the coatings were adhesive and abrasive wear.
Key words: Mo0.5NbTiVCr0.25 alloy; laser cladding; refractory high-entropy alloy; microstructure; aging; wear
