中國(guó)有色金屬學(xué)報(bào)(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 34 No. 3 March 2024 |
（1. School of Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201, China;
2. Hunan Provincial Key laboratory of High Efficiency and Precision Machining of Difficult-to-cut Material, Hunan University of Science and Technology, Xiangtan 411201, China;
3. School of Materials Science and Engineering, Hunan University of Science and Technology, Xiangtan 411201, China;
4. College of Materials Science and Engineering, Chongqing University of Technology, Chongqing 400054, China;
5. School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China;
6. Institute for Advanced Studies in Precision Materials, Yantai University, Yantai 264005, China）
Abstract:AZ31 magnesium alloy sheets were fabricated by repeated bending-flattening deformation (RBFD) using dies of various angles. The microstructure evolution and deformation behaviors of the AZ31 Mg alloy during RBFD were investigated by FEM, OM, EBSD and hardness tester. The results suggest that the 150°/150° die exhibits the superior performance across all three groups. With an increase in passes, the effective strain of the alloy is significantly improved due to the positive impact of shear and bending. After four passes, the average grain size can be significantly refined to 1.7 μm, and a weaker basal texture can be obtained compared to the initial one due to non-basal slips, dynamic recrystallization (DRX), and twinning. Particularly, the pyramidal ác+a？ slip promotes DRX and twinning. The hardness of the alloy reaches HV 77 as a result of the comprehensive effect of microstructure and texture generated by slip, twinning and DRX competition.
Key words: AZ31 Mg alloy sheet; microstructure evolution; deformation behavior; repeated bending-flattening process; die angle
